Monday, January 23, 2012

Performance vs. load vs. stress testing


Performance testing
The goal of performance testing is not to find bugs, but to eliminate bottlenecks and establish a baseline for future regression testing. To conduct performance testing is to engage in a carefully controlled process of measurement and analysis. Ideally, the software under test is already stable enough so that this process can proceed smoothly.
A clearly defined set of expectations is essential for meaningful performance testing. If you don’t know where you want to go in terms of the performance of the system, then it matters little which direction you take (remember Alice and the Cheshire Cat?). For example, for a Web application, you need to know at least two things:
  • expected load in terms of concurrent users or HTTP connections
  • acceptable response time
Once you know where you want to be, you can start on your way there by constantly increasing the load on the system while looking for bottlenecks. To take again the example of a Web application, these bottlenecks can exist at multiple levels, and to pinpoint them you can use a variety of tools:
  • at the application level, developers can use profilers to spot inefficiencies in their code (for example poor search algorithms)
  • at the database level, developers and DBAs can use database-specific profilers and query optimizers
  • at the operating system level, system engineers can use utilities such as top, vmstat, iostat (on Unix-type systems) and PerfMon (on Windows) to monitor hardware resources such as CPU, memory, swap, disk I/O; specialized kernel monitoring software can also be used
  • at the network level, network engineers can use packet sniffers such as tcpdump, network protocol analyzers such as ethereal, and various utilities such as netstat, MRTG, ntop, mii-tool
From a testing point of view, the activities described above all take a white-box approach, where the system is inspected and monitored “from the inside out” and from a variety of angles. Measurements are taken and analyzed, and as a result, tuning is done.
However, testers also take a black-box approach in running the load tests against the system under test. For a Web application, testers will use tools that simulate concurrent users/HTTP connections and measure response times. Some lightweight open source tools I’ve used in the past for this purpose areabsiegehttperf. A more heavyweight tool I haven’t used yet is OpenSTA. I also haven’t used The Grinder yet, but it is high on my TODO list.
When the results of the load test indicate that performance of the system does not meet its expected goals, it is time for tuning, starting with the application and the database. You want to make sure your code runs as efficiently as possible and your database is optimized on a given OS/hardware configurations. TDD practitioners will find very useful in this context a framework such as Mike Clark’sjUnitPerf, which enhances existing unit test code with load test and timed test functionality. Once a particular function or method has been profiled and tuned, developers can then wrap its unit tests in jUnitPerf and ensure that it meets performance requirements of load and timing. Mike Clark calls this “continuous performance testing“. I should also mention that I’ve done an initial port of jUnitPerf to Python — I called it pyUnitPerf.
If, after tuning the application and the database, the system still doesn’t meet its expected goals in terms of performance, a wide array of tuning procedures is available at the all the levels discussed before. Here are some examples of things you can do to enhance the performance of a Web application outside of the application code per se:
  • Use Web cache mechanisms, such as the one provided by Squid
  • Publish highly-requested Web pages statically, so that they don’t hit the database
  • Scale the Web server farm horizontally via load balancing
  • Scale the database servers horizontally and split them into read/write servers and read-only servers, then load balance the read-only servers
  • Scale the Web and database servers vertically, by adding more hardware resources (CPU, RAM, disks)
  • Increase the available network bandwidth
Performance tuning can sometimes be more art than science, due to the sheer complexity of the systems involved in a modern Web application. Care must be taken to modify one variable at a time and redo the measurements, otherwise multiple changes can have subtle interactions that are hard to qualify and repeat.
In a standard test environment such as a test lab, it will not always be possible to replicate the production server configuration. In such cases, a staging environment is used which is a subset of the production environment. The expected performance of the system needs to be scaled down accordingly.
The cycle “run load test->measure performance->tune system” is repeated until the system under test achieves the expected levels of performance. At this point, testers have a baseline for how the system behaves under normal conditions. This baseline can then be used in regression tests to gauge how well a new version of the software performs.
Another common goal of performance testing is to establish benchmark numbers for the system under test. There are many industry-standard benchmarks such as the ones published by TPC, and many hardware/software vendors will fine-tune their systems in such ways as to obtain a high ranking in the TCP top-tens. It is common knowledge that one needs to be wary of any performance claims that do not include a detailed specification of all the hardware and software configurations that were used in that particular test.
Load testing
We have already seen load testing as part of the process of performance testing and tuning. In that context, it meant constantly increasing the load on the system via automated tools. For a Web application, the load is defined in terms of concurrent users or HTTP connections.
In the testing literature, the term “load testing” is usually defined as the process of exercising the system under test by feeding it the largest tasks it can operate with. Load testing is sometimes called volume testing, or longevity/endurance testing.
Examples of volume testing:
  • testing a word processor by editing a very large document
  • testing a printer by sending it a very large job
  • testing a mail server with thousands of users mailboxes
  • a specific case of volume testing is zero-volume testing, where the system is fed empty tasks
Examples of longevity/endurance testing:
  • testing a client-server application by running the client in a loop against the server over an extended period of time
Goals of load testing:
  • expose bugs that do not surface in cursory testing, such as memory management bugs, memory leaks, buffer overflows, etc.
  • ensure that the application meets the performance baseline established during performance testing. This is done by running regression tests against the application at a specified maximum load.
Although performance testing and load testing can seem similar, their goals are different. On one hand, performance testing uses load testing techniques and tools for measurement and benchmarking purposes and uses various load levels. On the other hand, load testing operates at a predefined load level, usually the highest load that the system can accept while still functioning properly. Note that load testing does not aim to break the system by overwhelming it, but instead tries to keep the system constantly humming like a well-oiled machine.
In the context of load testing, I want to emphasize the extreme importance of having large datasets available for testing. In my experience, many important bugs simply do not surface unless you deal with very large entities such thousands of users in repositories such as LDAP/NIS/Active Directory, thousands of mail server mailboxes, multi-gigabyte tables in databases, deep file/directory hierarchies on file systems, etc. Testers obviously need automated tools to generate these large data sets, but fortunately any good scripting language worth its salt will do the job.
Stress testing
Stress testing tries to break the system under test by overwhelming its resources or by taking resources away from it (in which case it is sometimes called negative testing). The main purpose behind this madness is to make sure that the system fails and recovers gracefully — this quality is known asrecoverability.
Where performance testing demands a controlled environment and repeatable measurements, stress testing joyfully induces chaos and unpredictability. To take again the example of a Web application, here are some ways in which stress can be applied to the system:
  • double the baseline number for concurrent users/HTTP connections
  • randomly shut down and restart ports on the network switches/routers that connect the servers (via SNMP commands for example)
  • take the database offline, then restart it
  • rebuild a RAID array while the system is running
  • run processes that consume resources (CPU, memory, disk, network) on the Web and database servers
I’m sure devious testers can enhance this list with their favorite ways of breaking systems. However, stress testing does not break the system purely for the pleasure of breaking it, but instead it allows testers to observe how the system reacts to failure. Does it save its state or does it crash suddenly? Does it just hang and freeze or does it fail gracefully? On restart, is it able to recover from the last good state? Does it print out meaningful error messages to the user, or does it merely display incomprehensible hex codes? Is the security of the system compromised because of unexpected failures? And the list goes on.
Conclusion
I am aware that I only scratched the surface in terms of issues, tools and techniques that deserve to be mentioned in the context of performance, load and stress testing. I personally find the topic of performance testing and tuning particularly rich and interesting, and I intend to post more articles on this subject in the future.

JMeter quick start guide.


Thanks,
Sumit

Friday, January 20, 2012

Load Runner

Hi friends,

If anybody wanted to learn Load runner..

You can videos on http://www.guru99.com/loadrunner-tutorials.html

It will surely help.

Thanks,
Sumit

Selenium WebDriver Introduction Selenium Webdriver Tutorial Webdriver Example Selenium Training


TestNg and Selenium RC Junit ANT Selenium Training Frameworks





Junit Tutorials

Hi Friends,

I have come across 1 good video: having details about how to use Junit in eclipse for selenium.




























Thanks,
Sumit

How to Capture Screenshot with TestNG.

I have found one blog which will go through all the process how to capture screenshot with TestNG.


Tips on Selenium RC.

1. To run the Java client you need to only have selenium-java-client-driver.jar (located in selenium-remote-control-1.0-beta-1/selenium-java-client-driver-1.0-beta-1 ) in your classpath.

2. The automatically generated java file (from Selenium Core) is likely to be defective. Ensure at least you have the following import statements:import com.thoughtworks.selenium.*;
import junit.framework.*;
import java.util.regex.Pattern;

3. Ensure that the saved file name matches the generated class file name

.4. Remove the package statement or replace it with your own package statement. Initially just remove it.

5. Error: java.lang.UnsupportedOperationException: Catch body broken: IOException from cmd=setContext&1=SeleniumSTSanityTest.testSimpleThoughts -> java.net.ConnectException: Connection refusedHave you run the Selenium server?
Run the Selenium server like this:
java -jar selenium-server.jarThe selenium server is located in:
selenium-remote-control-1.0-beta-1/selenium-server-1.0-beta-16. Error: com.thoughtworks.selenium.SeleniumException: ERROR Server Exception: sessionId should not be null; has this session been started yet?Ensure that the browser is in the PATH before running the server. On my linux box I did:
export PATH=$PATH:/usr/lib/firefox-2.0.0.6/7. Error: com.thoughtworks.selenium.SeleniumException: Permission denied to get property Location.hrefThis happens on Firefox when a previous page wasn’t fully loaded before the next page was invoked (due to timeout or click() was used). The solution is to use *chrome instead of *firefox in setup. I use for firefox:
setUp(“http://blog.taragana.com/”, “*chrome”);8. Timeout error
Increase the time in selenium.waitForPageToLoad() to 60000 (1 minute) or more.9. How to run the generated java Test file?
This is really a JUnit question but in short you can add the following code in the generated file to get it running:public static Test suite() {
return new TestSuite(SeleniumSTSanityTest.class);
}public static void main(String args[]) {
junit.textui.TestRunner.run(suite());
}
Note: Replace SeleniumSTSanityTest with the name of your Java source file (without the .java extension)